光速飞艇歡迎您的到來!

header_tel_1.jpg

鑄鐵鑲銅閘門哪裡有賣的廠家以及鑲銅閘門的工藝要求

日期:2019-02-06 16:04  人氣:45

  鑄鐵鑲銅閘門首先閘門廠家,專業鑲銅閘門生産廠家,工藝設計先進,由于鑲銅閘門的特殊性對于閘門的要求比較高,為了保證閘門的密封性伸拉性都做了工藝上的嚴格要求。

它采用獨特的外弧形設計,結構合理、受力均勻,采用優質灰口鑄鐵或球墨鑄鐵、不鏽鋼制造,止水密封面鑲銅條或橡膠,并經精密加工後配研,達到平面接觸密封,密封性能好,當密封止水性能下降時,可通過楔塊裝置的調整加以解決。

1.鑄鐵鑲銅方閘門由門框、閘闆、導軌、密封條、傳動螺杆、吊塊螺母/吊耳和可調整密封機構等部件組成,其中門框和閘闆均由優質灰口鑄鐵或球墨鑄鐵制成,導軌左右對稱布置且用不鏽鋼螺栓定位銷與門框二側端部連接 對中小口徑的閘門,其導軌可與門框澆注成一體,導軌長度一般為閘門全開啟高度的1/2~1/3,因而整體結構強度高、剛性高、耐磨、耐腐蝕性好、承壓能力大。

  It is made of high quality gray cast iron or nodular cast iron and stainless steel. The sealing surface is inlaid with copper strip or rubber. After precise processing, it can achieve plane contact seal with good sealing performance. When the sealing performance decreases, it can be solved by adjusting the wedge device. Cast iron brass-inlaid square gate 1. Cast iron brass-inlaid square gate consists of gate frame, gate plate, guide rail, sealing strip, transmission screw, hanger nut/lug and adjustable sealing mechanism. The gate frame and gate plate are made of high-quality gray cast iron or ductile iron. The guide rail is symmetrically arranged and connected with the two ends of the gate frame with positioning pins of stainless steel BOLS (for small and medium-sized gate, its guide). The rail can be poured into the door frame. The length of the guide rail is generally 1/2~1/3 of the gate opening height. Therefore, the whole structure has high strength, high rigidity, wear resistance, good corrosion resistance and high bearing capacity.


cache
Processed in 0.006881 Second.